N844L-D Shibaura Tier 3
PRINT THIS PAGE
AVAILABLE EQUIPMENT MODELS
Engine Series:
Shibaura
Engine Model:
N844L-D
Engine Desc:
NATURALLY ASPIRATED
Engine Data:
Engine Info:
4 Cyl
Engine Dimensions:
Bore: 3.3 in / 84.00 mm
Stroke: 3.9 in / 100.00 mm
Displacemement: 134.25 in3 /2.2 Lt
Compression Ratio: 23.3:1
- Farmall45 - Tractor
- Farmall45A - Tractor
- Farmall45B - Tractor
- Farmall50 - Tractor
- Farmall50B - Tractor
- SR130 - Skid Steer
- L213 - Skid Steer
- Workmaster 45 - Tractor
CLOSE
Equipment Models
Case IH
new-holland
-
1) Engine O/H KitPOK464 Std. Click to view kit contentPOK465 0.50 Click to view kit contentCLOSEItem #:Quantity:Description:P0201091208NUT, CON RODP0502090831SEAL, OIL, REAR CRANKSHAFTP1150174914PISTON AND RING KITP1151761408BOLT, CON RODP1985172221BUSHING, CRANKSHAFT, STDP1985172654SEMI-FINISHED BUSHING, CONNECTING RODP1985861401BRG SET, MAIN, StdP1986361601SEAL,OIL, FRONT CRANKSHAFTP199266200/101THRUST WASHER SETP404DTOG1GASKET, OVERHAUL KITPU5ME00111BRG, CON ROD SETPVTK4401KIT, VALVE TRAINCLOSEItem #:Quantity:Description:P0201091208NUT, CON RODP0502090831SEAL, OIL, REAR CRANKSHAFTP115017491B4PISTON WITH RINGS KIT, 0.50 mmP1151761408BOLT, CON RODP1985172221BUSHING, CRANKSHAFT, STDP1985172654SEMI-FINISHED BUSHING, CONNECTING RODP1985861401BRG SET, MAIN, StdP1986361601SEAL,OIL, FRONT CRANKSHAFTP199266200/101THRUST WASHER SETP404DTOG1GASKET, OVERHAUL KITPU5ME00111BRG, CON ROD SETPVTK4401KIT, VALVE TRAIN2) Basic Engine KitPBK464 Std. Click to view kit contentPBK465 0.50 Click to view kit contentCLOSEItem #:Quantity:Description:P0201091208NUT, CON RODP0502090831SEAL, OIL, REAR CRANKSHAFTP1150174914PISTON AND RING KITP1151761408BOLT, CON RODP1985172221BUSHING, CRANKSHAFT, STDP1985172654SEMI-FINISHED BUSHING, CONNECTING RODP1985861401BRG SET, MAIN, StdP1986361601SEAL,OIL, FRONT CRANKSHAFTP199266200/101THRUST WASHER SETP404DTOG1GASKET, OVERHAUL KITPU5ME00111BRG, CON ROD SETSpec Sheet - 400D SeriesCLOSEItem #:Quantity:Description:P0201091208NUT, CON RODP0502090831SEAL, OIL, REAR CRANKSHAFTP115017491B4PISTON WITH RINGS KIT, 0.50 mmP1151761408BOLT, CON RODP1985172221BUSHING, CRANKSHAFT, STDP1985172654SEMI-FINISHED BUSHING, CONNECTING RODP1985861401BRG SET, MAIN, StdP1986361601SEAL,OIL, FRONT CRANKSHAFTP199266200/101THRUST WASHER SETP404DTOG1GASKET, OVERHAUL KITPU5ME00111BRG, CON ROD SET -
1) Piston & Ring KitP115017491 Std. P115017491B 0.504 Per Engine2) Ring SetP115107970 Std. P115107970B 0.50 -
Main Bearing SetP198586140 Std. P198586150 0.010 P198586160 0.020Set of 4 Pairs -
Con Rod Bearing SetPU5ME0011 Std. PU5ME0011A 0.010 PU5ME0011B 0.020Set of 4 Pairs -
1) Thrust WasherP199266200/10Set of 3 Pcs2) Crank BushingP198517222 Std. P198517226 0.010 P198517229 0.020 -
1) Front SealP1986361602) Rear SealP0502090833) CrankshaftP115256990 (2)Do not use in applications that require a Crankshaft Driven Balancer Unit. The new style front gear is P/N U15276270, (.887″ or 22.5mm Wide) and the key way P/N P030509020, must be used.
4) Crankshaft GearPU152762705) Key, Crank GearP0305090206) Flywheel Ring GearP115376040 109T PU15376160 126T -
1) O/H Gasket SetP404DTOG (1)Does not include Crankshaft Oil Seals.
2) Cyl Head GskP1111477713) Seal Rocker BoxP1209961304) Seal, Cyl HD CovP1119964015) Oil Pan GasketP1109969206) Timing Gasket CoverP165996590 (6)Included in P404DTOG.
P165996600 (6)Included in P404DTOG.
P165996630 (6)Included in P404DTOG.
-
1) Bush, Con RodP198517265 x42) Bolt, Con RodP115176140 x83) Nut, Con RodP020109120 x84) Connecting RodP1150263305) Head BoltP111136480 x14 P111136490 x4 -
1) TappetP1201161602) Seal, Intk ValveP120406070 x43) Seal, Exh ValveP120406050 x4
Valve Section
-
Valve Train Kit
-
1) Valve, Intake2) Valve, Exhaust
-
3) Spring, Valve4) Retainer, Valve SpringP120186080 x8 (4)
Not included in valve train kit.
-
5) Lock, Valve
-
1) Oil PumpPU5MK82672) Oil CoolerP2486A218 -
Water PumpPU45010062 -
1) Lift PumpP1305063512) ThermostatP1452062303) AtomiserP131406490 (3)Use with GN Build, 404D-22 Engine.
-
Repair Sleeve1) 84RS2) Cylinder HeadP111011030UF (5)For use on 400 series engines only where the intake manifold is part of the cylinder head cover.
-
Fuel Lines1) P131507700 (5)For use on 400 series engines only where the intake manifold is part of the cylinder head cover.
2) P131507710 (5)For use on 400 series engines only where the intake manifold is part of the cylinder head cover.
3) P131507720 (5)For use on 400 series engines only where the intake manifold is part of the cylinder head cover.
4) P131507730 (5)For use on 400 series engines only where the intake manifold is part of the cylinder head cover.
(1): Does not include Crankshaft Oil Seals.
(2): Do not use in applications that require a Crankshaft Driven Balancer Unit. The new style front gear is P/N U15276270, (.887″ or 22.5mm Wide) and the key way P/N P030509020, must be used.
(3): Use with GN Build, 404D-22 Engine.
(4): Not included in valve train kit.
(5): For use on 400 series engines only where the intake manifold is part of the cylinder head cover.
(6): Included in P404DTOG.