John Deere 6076 T/A/H Low Ring Piston
Bore: 4.56 in / 116 mm
Pin Ø: 1.8742 in / (+/- .0002) = 47 mm
- 4955
- 4960
- 8560
- 8570
- 892E
farm tractors
excavators
-
1) Engine O/H KitTRE60299 Click to view kit contentCLOSEItem #:Quantity:Description:TAR490251SEAL, CRANKSHAFT FRONT/ WITH WEAR SLEEVETAR732776BRG, CON ROD STDTAR748146BRG, MAIN STDTAR777471WASHER, THRUST SET STDTAR777481BRG, MAIN THRUST STDTR6645212CAPSCREW, CON RODTR740086BUSHING, CON RODTR875614BUSHING, CAMSHAFTTRE356471GASKET, O/H SETTRE5200361SEAL, CRANKSHAFT REARTRE602976KIT, CYL LOW RING2) Engine I/F KitTIK60299 Click to view kit contentSPEC SHEET - 6076T-A-HCLOSEItem #:Quantity:Description:TAR732776BRG, CON ROD STDTAR748146BRG, MAIN STDTAR777471WASHER, THRUST SET STDTAR777481BRG, MAIN THRUST STDTR6645212CAPSCREW, CON RODTR719181GASKET, OIL PANTRE298591GASKET, CYL HEAD SETTRE602976KIT, CYL LOW RING -
Piston-Liner KitTRE60297Consists of:a) TRE57731 (1)Low Ring Piston.
b) TRE48380 c) TR57771 d) TAR63060 e) TAR98850 f) TE1343FN -
Main BearingTAR74814 Std. TAR74816 0.010 TAR74817 0.020 TAR74818 0.030Use 6 -
Thrust BearingTAR77748 Std. TAR77750 0.010 TAR77751 0.020 TAR77752 0.030Use 1Thrust WasherTAR77747 Std. TAR77753 0.007 -
Con Rod BearingTAR73277 Std. TAR73279 0.010 TAR73280 0.020 TAR73281 0.030Use 6 -
1) Front SealTAR490252) Rear SealTRE5200363) CrankshaftTRE53422 (3)Short snout (3in) C/S (m) RE53203, R63451, R104855.
(5)Require front key TR116311 for the front damper.
(12)In some blocks with casting R40620 the crank may hit the block near the oil pump mounting and requires grinding approximately 1/8″ from the crank or block for clearance.
TRE53201 (2)Long snout (3.4in.) C/S (m) R87544, RE53201.
(5)Require front key TR116311 for the front damper.
4) Crankshaft, GearTR105488 (4)TRE53422 Use Helicoidal front gear.
5) Ring GearTR28811 (129T)6) Rear GearTR63326 -
1) O/H Gasket SetTRE356472) Head Gasket SetTRE298593) Head GasketTRE473364) Oil Pan GasketTR71918 TR520844 (12)In some blocks with casting R40620 the crank may hit the block near the oil pump mounting and requires grinding approximately 1/8″ from the crank or block for clearance.
5) Front Cover GasketTR104623 TR994646) Oil Cooler GasketTR128557 TR128558 -
1) Bush, Con RodTR74008 x62) Bolt, Con RodTR66452 x123) Bushing, CamTR87561 x44) Con RodTAR93341 x1 -
1) Oil CoolerTAR55394 (7)To ESN 100664 Use: TAT25038. Not for use with From ESN 500,000.
2) O'Ring, Oil CoolerTR471533) Plug, CamshaftTR820074) Head Bolt KitTMX366 (6)Use with blocks marked R109806 and below.
TRG24026 (11)For engines with ESN 500,000 and above. Use only with blocks marked R122738 & above.
5) TappetTR110126 x12 (8)From ESN 192401.
6) Belt TensionerTRE57498 (9)Check application for proper usage.
TRE68715 (9)Check application for proper usage.
-
1) Pump, OilTRE60622 TRE507074 (10)For engines with ESN 500 000 and above, and housing is marked (m) R124746 or R504071.
2) CamshaftTR108370 (13)For engines to ESN 499,999.
TR120872 (14)For engines from ESN 500,000
3) Camshaft BoltTR853194) Camshaft KitTRE57054 (14)For engines from ESN 500,000
(15)Contain TR120872 x 1 and TR110126 x 12.
TRG22421 (13)For engines to ESN 499,999.
(16)Contains TR108370 x 1 and TR85319 x 1 and TR110126 x 12.
-
Valve, Intake
-
Valve, Exhaust
-
1) Insert, Valve In2) Insert, Valve Ex
-
1) Cap, Valve2) Lock, Valve3) Shield, Valve
-
1) Spring, Valve2) Rotator, Valve
-
1) ThermostatTAR48675 180° F2) Water Temp SensorTRE52722 (9)Check application for proper usage.
3) Crankshaft SensorTRE519144 (9)Check application for proper usage.
-
Water Pump Repair KitSee Chart 180° F -
Water PumpTRE55985 (m) R71224, (m) R83561 (9)Check application for proper usage.
TRE55986 (m) R71224, (m) R83561 (9)Check application for proper usage.
TRE68230 (High flow)