John Deere 6.404D To ESN 214,999
PRINT THIS PAGE
AVAILABLE EQUIPMENT MODELS
Engine Series:
400
Engine Model:
6.404D
Engine Data:
To ESN 214,999
Engine Info:
6 Cyl
Engine Dimensions:
Bore: 4.25 in / 108 mm
Pin Ø: 1.50 in / 38 mm
(1)
Block (m):
R40930
Con Rod (m):
R26047, R58880, R66923
- 4010
- 4020
CLOSE
Equipment Models
farm tractors
-
1) Engine O/H KitTRG17902 Click to view kit contentCLOSEItem #:Quantity:Description:TAR457236BRG, CON ROD STDTAR490251SEAL, CRANKSHAFT FRONT/ WITH WEAR SLEEVETAR536261GASKET, O/H SETTAR748146BRG, MAIN STDTAR777471WASHER, THRUST SET STDTAR777481BRG, MAIN THRUST STDTR309396BUSHING, CON RODTR469034BUSHING, CAMSHAFT 400/500 SERIESTR6645212CAPSCREW, CON ROD 400 SERIESTRE231706KIT, CYL 4270/6404DTRE5200361SEAL, CRANKSHAFT REAR2) Engine I/F KitTIK17902 Click to view kit contentSPEC SHEET - 6.404DCLOSEItem #:Quantity:Description:TAR457236BRG, CON ROD STDTAR536251GASKET, CYL HEAD SET 6.404DTAR748146BRG, MAIN STDTAR777471WASHER, THRUST SET STDTAR777481BRG, MAIN THRUST STDTR6645212CAPSCREW, CON ROD 400 SERIESTR719181GASKET, OIL PAN 6404/6466TRE231706KIT, CYL 4270/6404D -
Piston-Liner KitTRE23170Consists of:a) TRE23172 b) TAR55630 c) TR44161 d) TR40615 e) TAR65507 f) TH80753 -
Main BearingTAR74814 Std. TAR74816 0.010 TAR74817 0.020 TAR74818 0.030Use 6 -
Thrust BearingTAR77748 Std. TAR77750 0.010 TAR77751 0.020 TAR77752 0.030Use 1Thrust WasherTAR77747 Std. TAR77753 0.007Use 3, Order Qty: 1 -
Con Rod BearingTAR45723 Std. TAR46396 0.010 TAR46397 0.020 TAR46398 0.030Use 6 -
1) Front SealTAR490252) Rear SealTRE5200363) CrankshaftTRE53422 (5) (6)4) Crankshaft, GearTR26049 (23T)5) Ring GearTR28811 (129T) -
1) O/H Gasket SetTAR536262) Head Gasket SetTAR536253) Head GasketTR456154) Oil Pan GasketTR719185) GasketTR49866 -
1) Bush, Con RodTR30939 x62) Bolt, Con RodTR66452 x123) Bushing, CamTR46903 x44) Con RodTAR70910 -
1) Cam FollowerTR52773 x122) Plug, CamshaftTR261153) O'ring, Oil CoolerTR47153
Valve Section
-
Valve, Intake
-
Valve, Exhaust
-
1) Insert, Valve In2) Insert, Valve Ex
-
1) Lock, Valve
-
1) Spring, Valve2) Guide, Valve3) O'ring, Valve
(1): Original Block.
(2): To ESN 82,801.
(3): ESN 82,802 – 422,365.
(4): From ESN 422,366.
(5): New style crankshaft. To adapt to old style, the center hole in the flywheel needs to be enlarged to 2.835 in. (72.0009 mm). Extra bolt holes in the rear palm of the crankshaft need to be plugge with allen head screws and tread sealer / locker. TRE53422 will require front key TR116311 for the front damper.
(6): In some blocks with casting R40620 the crank may hit the block near the oil pump mounting and requires grinding approximately 1/8″ from the crank or block for clearance.