John Deere 3029D Liter Designated
PRINT THIS PAGE
AVAILABLE EQUIPMENT MODELS
Engine Series:
300
Engine Model:
3029D
Engine Desc:
Liter Designated
Engine Info:
3 Cyl
Engine Dimensions:
Bore: 4.19 in / 106.5 mm
Pin Ø: 1.3750 in / (+/- .0002) = 35mm
Con Rod (m):
R51727, R80034
Piston (m):
RE30250
- 5200
- 5300
- 5400
- 240
- 240 Series II
CLOSE
Equipment Models
farm tractors
skid steers
-
1) Engine O/H KitTRE47653 Click to view kit contentCLOSEItem #:Quantity:Description:TAR679421SEAL, CRANKSHAFT FRONTTAT211391BRG, MAIN THRUST STDTMX5041KIT, GROMMET(4)TR556473BUSHING, CON RODTR800336CAPSCREW, CON ROD 300 SERIESTRE273483BRG, CON ROD STDTRE273523BRG, MAIN STDTRE302503KIT, CYL 3179/4239/6359TRE316176SEAL, VALVE STEM LITER ENGTRE445741SEAL, OIL REARTRE5015781GASKET, O/H SET 3164DT/3029DT2) Engine I/F KitTIK47653 Click to view kit contentCLOSEItem #:Quantity:Description:TAT211391BRG, MAIN THRUST STDTR800336CAPSCREW, CON ROD 300 SERIESTR973411GASKET, OIL PAN 3 CYL, 300 SERIESTRE273483BRG, CON ROD STDTRE273523BRG, MAIN STDTRE302503KIT, CYL 3179/4239/6359TRE316176SEAL, VALVE STEM LITER ENGTRE388501GASKET, CYL HEAD SET
-
Piston-Liner KitTRE30250Consists of:a) TRE19282 b) TRE66820 c) TR125754 d) TR116281 e) TAR65507 f) TM41029
-
Main BearingTRE27352 Std. TRE27353 0.010 TRE27360 0.020 TRE27368 0.030Use 3
-
Thrust BearingTAT21139 Std. TAT21132 0.010 TAT21134 0.020 TAT21136 0.030Use 1
-
Con Rod BearingTRE27348 Std. TRE27349 0.010 TRE27358 0.020 TRE27364 0.030Use 3
-
1) Front SealTAR679422) Rear SealTRE445743) CrankshaftTRE521348 (5)4) Crankshaft, GearTT20094 (3)5) Ring GearTR114282 (142T)6) Sleeve, FrontTR819897) Packing, SleeveTH35244
-
1) O/H Gasket SetTRE5015782) Head Gasket SetTRE388503) Head GasketTR973564) Oil Pan GasketTR973415) Rocker Cover GskTR75729 (2) TR106796 (1)
-
1) Bush, Con RodTR55647 x32) Bolt, Con RodTR80033 x63) Camshaft KitTRE559004) Con RodTRE16495
-
1) Pump, OilTRE553432) Oil CoolerTRE617675) Pump, Oil TubeTR1137524) Cyl Hd Cap ScrewTR85363 x14 (4)5) Oil Pump O'RingTR61871
-
1) Lower GearTAT24252 (3)2) Lower BushingTT263213) Upper GearTAT18009 (3)4) Upper BushingTT200345) Cam. FollowerTT20073 x66) Cam. GearTT20070 (3)7) Camshaft KitTRE55900 (9)8) CamshaftTR106957 (9)
Valve Section
-
Valve, Intake
-
Valve, Exhaust
-
1) Insert, Valve In2) Insert, Valve Ex
-
1) Seal, Valve2) Lock, Valve
-
1) Spring, Valve2) Rotator, Valve
-
1) ThermostatTRE64354 180° F2) Thermostat CoverTT236203) Water Temp SensorTRE51774 (8)4) Thermostat Cover GskTT20215
-
1) Fuel Transfer PumpTRE422112) Fuel Pump GasketTR272853) Fuel Filter Base with PrimeTRE67225
-
Water Pump Repair KitWithout Impeller TRE19507 (10)With ImpellerTRE62658 (10)
-
1) Water PumpTAR97708U (6) TRE60489 (7) TAR92641 (8)2) Water Pump GasketTT20242 TT20268
-
1) Seal, InjectorTR60746 TR480002) Injector, PencilTRE369363) Kit, GrommetTMX504
(1): Not included in Gasket Set. Used in Saran Engines (Order Separately).
(2): Reusable.
(3): Helicoidal Gears.
(4): Replace all R78558 Cap Screws with Flanged Head Cap Screw TR85363.
(5): Kit contains TT20094 helical gear to convert to a TRE50979 Crankshaft.
(6): (m) R73604.
(7): m) R100812, (m) R127337, (m) R127918, (m) R55164.
(8): Check your application for proper usage.
(9): Camshaft has a 40 mm wide front bearing journal and made for a rear press in tachometer drive, it will replace early camshafts with narrower front bearing journal without any issue. Replaces camshafts marked T20015, T20016, R79643, R106957 and RE522311.
(10): See the Water Pump Identification Chart to make sure these part numbers are correct. You will need the water pump casting number and will need to know if you have a stamped steel pulley or a cast iron pulley.