John Deere 3.179T
Bore: 4.19 in / 106.5 mm
Pin Ø: 1.6250 in / (+/- .0002) = 41mm
- 2355NCS
- 2355NTSS
- JT2321
- Directional Boring System
farm tractors
ditch witch
-
1) Engine O/H KitTOK3115 Click to view kit contentCLOSEItem #:Quantity:Description:TAR679421SEAL, CRANKSHAFT FRONTTAT211391BRG, MAIN THRUST STDTMX5041KIT, GROMMET(4)TR574513BUSHING, CON RODTR800336CAPSCREW, CON ROD 300 SERIESTRE273483BRG, CON ROD STDTRE273523BRG, MAIN STDTRE316176SEAL, VALVE STEM LITER ENGTRE331153KIT, CYL 3179/4239/6359TRE445741SEAL, OIL REARTRE5015781GASKET, O/H SET 3164DT/3029DT2) Engine I/F KitTIK3115 Click to view kit contentCLOSEItem #:Quantity:Description:TAT211391BRG, MAIN THRUST STDTR800336CAPSCREW, CON ROD 300 SERIESTR973411GASKET, OIL PAN 3 CYL, 300 SERIESTRE273483BRG, CON ROD STDTRE273523BRG, MAIN STDTRE316176SEAL, VALVE STEM LITER ENGTRE331153KIT, CYL 3179/4239/6359TRE388501GASKET, CYL HEAD SET
-
Piston-Liner KitTRE33115Consists of:a) TRE19278 b) TRE66820 c) TR124230 d) TR116281 e) TAR65507 f) TR54114
-
Main BearingTRE27352 Std. TRE27353 0.010 TRE27360 0.020 TRE27368 0.030Use 3
-
Thrust BearingTAT21139 Std. TAT21132 0.010 TAT21134 0.020 TAT21136 0.030Use 1
-
Con Rod BearingTRE27348 Std. TRE27349 0.010 TRE27358 0.020 TRE27364 0.030Use 3
-
1) Front SealTAR679422) Rear SealTRE445743) CrankshaftTAT18031 (3)
Crankshaft (m) T23516 (36 mm / 1.37” Snout.) This engine may use TRE50979 (60 mm / 2.36” Snout) (m) R91834.
4) Crankshaft, GearTT200945) Ring GearTR114282 (142T)6) Sleeve, FrontTR819897) Packing, SleeveTH35244 -
1) O/H Gasket SetTRE5015782) Head Gasket SetTRE388503) Head GasketTR973564) Oil Pan GasketTR973415) Rocker Cover GskTR75729
-
1) Bush, Con RodTR57451 x32) Bolt, Con RodTR80033 x63) Con RodTRE583474) Kit, Piston PinTRE63913 x3
-
1) Pump, OilTRE553432) Oil CoolerTRE31929 (4)
Use on engines ESN 794193, after this ESN use TRE61767.
3) Rocker ArmTRE319734) Rocker ShaftTR549855) Pump, Oil TubeTR1137526) Cyl Hd Cap ScrewTR85363 x14 (2)Replace all R78558 Cap Screws with Flanged Head Cap Screw TR85363.
7) Oil Pump O'RingTR61871 -
1) Lower GearTAT242522) Lower BushingTT263213) Upper GearTAT180094) Upper BushingTT200345) Cam. FollowerTT20073 x66) Cam. GearTT200707) Camshaft KitTRE55900 (8)
Camshaft has a 40 mm wide front bearing journal and made for a rear press in tachometer drive, it will replace early camshafts with narrower front bearing journal without any issue. Replaces camshafts marked T20015, T20016, R79643, R106957 and RE522311.
8) CamshaftTR106957 (8)Camshaft has a 40 mm wide front bearing journal and made for a rear press in tachometer drive, it will replace early camshafts with narrower front bearing journal without any issue. Replaces camshafts marked T20015, T20016, R79643, R106957 and RE522311.

-
Valve, Intake
-
Valve, Exhaust
-
1) Insert, Valve In2) Insert, Valve Ex
-
1) Cap, Valve2) Lock, Valve
-
1) Spring, Valve2) Rotator, Valve3) O’ring, Valve
-
1) ThermostatTRE33705 180° F (1)
Do not use with Housing (m) R54096, R70741, R74549. For Saran Repower Engines use TRE64354.
2) Thermostat CoverTT236203) Thermostat Cover GskTT20215 -
1) Fuel Transfer PumpTRE422112) Fuel Pump GasketTR27285
-
Water Pump Repair KitWithout Impeller TRE19507 (9)
See the Water Pump Identification Chart to make sure these part numbers are correct. You will need the water pump casting number and will need to know if you have a stamped steel pulley or a cast iron pulley.
With ImpellerTRE62658 (9)See the Water Pump Identification Chart to make sure these part numbers are correct. You will need the water pump casting number and will need to know if you have a stamped steel pulley or a cast iron pulley.
-
1) Water PumpTAR97708U (5)
(m) R73604.
TRE60489 (6)(m) R100812, (m) R127337, (m) R127918, (m) R55164.
TAR92641 (7)Check your application for proper usage.
2) Water Pump GasketTT20242 TT20268 -
1) Seal, InjectorTR60746 TR480002) Injector, PencilTRE375033) KIT, GROMMETTMX5044) Glow PlugTRE502079