John Deere 3.164 Large Pin, O’rings on Block
PRINT THIS PAGE
AVAILABLE EQUIPMENT MODELS
Engine Series:
300
Engine Model:
3.164
Engine Desc:
From ESN 179,602
Engine Data:
Large Pin, O’rings on Block
Engine Dimensions:
Bore: 4.02 in / 102 mm
Pin Ø: 1.3750 in / (+/- .0002) = 35mm
Block (m):
R55100, R72967, R72965, R80408
Con Rod (m):
RE19733 (SUB FOR AT18005)
Piston (m):
AR77762
- 1530
- 2040
- 2330
- 301A
- 302
- 302A
- 310
- 350B
- 350C
- 350D
CLOSE
Equipment Models
farm tractors
backhoe loaders
crawler dozers
-
1) Engine O/H KitTOK3041 Click to view kit contentCLOSEItem #:Quantity:Description:TAR679421SEAL, CRANKSHAFT FRONTTAR780413KIT, CYL 3164/4219/6329 W/PINTAT211391BRG, MAIN THRUST STDTMX5041KIT, GROMMET(4)TR556473BUSHING, CON RODTR741946CAPSCREW, CON ROD 300 SERIESTRE273483BRG, CON ROD STDTRE273523BRG, MAIN STDTRE445741SEAL, OIL REARTRE5015781GASKET, O/H SET 3164DT/3029DT2) Engine I/F KitTIK3041 Click to view kit contentCLOSEItem #:Quantity:Description:TAR780413KIT, CYL 3164/4219/6329 W/PINTAT211391BRG, MAIN THRUST STDTR741946CAPSCREW, CON ROD 300 SERIESTR973411GASKET, OIL PAN 3 CYL, 300 SERIESTRE273483BRG, CON ROD STDTRE273523BRG, MAIN STDTRE388501GASKET, CYL HEAD SET
-
Piston-Liner KitTAR78041Consists of:a) TAR77762 b) TAR55759 c) TR125754 d) TR116463 e) TAR71618 f) TM41029
-
Main BearingTRE27352 Std. TRE27353 0.010 TRE27360 0.020 TRE27368 0.030Use 3
-
Thrust BearingTAT21139 Std. TAT21132 0.010 TAT21134 0.020 TAT21136 0.030Use 1
-
Con Rod BearingTRE27348 Std. TRE27349 0.010 TRE27358 0.020 TRE27364 0.030Use 3
-
1) Front SealTAR679422) Rear SealTRE445743) CrankshaftTAT180314) Crankshaft, GearTT200945) Ring GearTR114282 (142T)
-
1) O/H Gasket SetTRE5015782) Head Gasket SetTRE388503) Head GasketTR973564) Oil Pan GasketTR973415) Rocker Cover GskTR75729
-
1) Bush, Con RodTR55647 x32) Bolt, Con RodTR74194 x63) Camshaft KitTRE559004) Con RodTRE16495 (3)
-
1) Pump, OilTRE553432) Oil CoolerTRE31929 (2)3) Rocker ArmTRE319734) Rocker ShaftTR549855) Pump, Oil TubeTR1137526) Oil Pump O'RingTR61871
-
1) Lower GearTAT242522) Lower BushingTT263213) Upper GearTAT180094) Upper BushingTT200345) Cam. FollowerTT20073 x66) Cam. GearTT200707) Camshaft KitTRE55900 (5)
Valve Section
-
Valve, Intake
-
Valve, Exhaust
-
1) Insert, Valve In2) Insert, Valve Ex
-
1) Cap, Valve2) Lock, Valve
-
1) Spring, Valve2) Rotator, Valve3) O’ring, Valve
-
1) ThermostatTRE33705 180° F (1)2) Thermostat CoverTT236203) Water Temp SensorTRE51774 (6)4) Thermostat Cover GskTT20215
-
1) Fuel Transfer PumpTRE422112) Fuel Pump GasketTR27285
-
Water Pump Repair KitWithout Impeller TRE19507 (7)With ImpellerTRE62658 (7)
-
1) Water PumpTAT27018 (4)2) Water Pump GasketTT20242 TT20268
-
Transmission Oil PumpTAL120106 (4)
-
1) Seal, InjectorTR60746 TR480002) Injector, PencilTAR895643) Kit, GrommetTMX5044) CapTAT27622 TAR856185) WasherTT295396) Tube NutTR51937
(1): Do not use with Housing (m) R54096, R70741, R74549.
(2): Conversion Kit TMX386: Available Consists of: TT31306 x1 Nipple TR99802 x2 Hose.
(3): For Connecting Rods RE16495 and RE21076 Use Connecting Rod Bolt TR80033.
(4): (m) R48997, (m) R51039.
(5): Camshaft has a 40 mm wide front bearing journal and made for a rear press in tachometer drive, it will replace early camshafts with narrower front bearing journal without any issue. Replaces camshafts marked T20015, T20016, R79643, R106957 and RE522311.
(6): Check for Proper Application.
(7): See the Water Pump Identification Chart to make sure these part numbers are correct. You will need the water pump casting number and will need to know if you have a stamped steel pulley or a cast iron pulley.