John Deere 3.152 O’rings on liner
PRINT THIS PAGE
AVAILABLE EQUIPMENT MODELS
Engine Series:
300
Engine Desc:
To ESN 154,765
Engine Data:
O’rings on Liner
Engine Info:
3 Cyl
Engine Dimensions:
Bore: 3.86 in / 98 mm
Pin Ø: 1.1878 in / (+/- .0001)=30mm
Block (m):
T24963, T26935
Con Rod (m):
T20007, R81410
Piston (m):
T23481
- 820
- 1020
- 1030
- 300
- 300A
- 350A
- 350B
- 380
CLOSE
Equipment Models
farm tractors
backhoe loaders
crawler dozers
forklifts
-
1) Engine O/H KitTOK3481 Click to view kit contentCLOSEItem #:Quantity:Description:TAR679421SEAL, CRANKSHAFT FRONTTAT211391BRG, MAIN THRUST STDTMX5041KIT, GROMMET(4)TPLK4813KIT, CYL 3152/4202TR741946CAPSCREW, CON ROD 300 SERIESTRE273483BRG, CON ROD STDTRE273523BRG, MAIN STDTRE385701GASKET, O/H SET 3152TRE445741SEAL, OIL REARTT234713BUSHING, CON ROD2) Engine I/F KitTIK3481 Click to view kit contentSPEC SHEET - 3.152 JOHN DEERECLOSEItem #:Quantity:Description:TAT211391BRG, MAIN THRUST STDTPLK4813KIT, CYL 3152/4202TR741946CAPSCREW, CON ROD 300 SERIESTR973411GASKET, OIL PAN 3 CYL, 300 SERIESTRE273483BRG, CON ROD STDTRE273523BRG, MAIN STDTRE388481GASKET, CYL HEAD SET -
Piston-Liner KitTPLK481Consists of:a) TT23481 b) TAR70633 c) TT23482 d) TAR51902 e) TR51112 -
Main BearingTRE27352 Std. TRE27353 0.010 TRE27360 0.020 TRE27368 0.030Use 3 -
Thrust BearingTAT21139 Std. TAT21132 0.010 TAT21134 0.020 TAT21136 0.030Use 1 -
Con Rod BearingTRE27348 Std. TRE27349 0.010 TRE27358 0.020 TRE27364 0.030Use 3 -
1) Front SealTAR679422) Rear SealTRE44574 (1)3) CrankshaftTAT180314) Crankshaft, GearTT200945) Ring GearTR114282 (142T) -
1) O/H Gasket SetTRE385702) Head Gasket SetTRE388483) Head GasketTR984604) Oil Pan GasketTR973415) Rocker Cover GskTR757296) Timing Cover GasketTT202737) Gasket Thermostat HousingTT20219 -
1) Bush, Con RodTT23471 x32) Bolt, Con RodTR74194 x6 (4)3) Camshaft KitTRE559004) Con RodTAT18005 -
1) Pump, OilTRE553432) Oil CoolerTRE31929 (3)3) Rocker ArmTRE319734) Rocker ShaftTR549855) Pump, Oil TubeTR1137526) Oil Pump O'RingTR61871 -
1) Lower GearTAT242522) Lower BushingTT263213) Upper GearTAT180094) Upper BushingTT200345) Cam. FollowerTT20073 x66) Cam. GearTT200707) Camshaft KitTRE55900 (5)
Valve Section
-
Valve, Intake
-
Valve, Exhaust
-
1) Insert, Valve In2) Insert, Valve Ex
-
1) Cap, Valve2) Lock, Valve
-
1) Spring, Valve2) Rotator, Valve3) O’ring, Valve
-
1) ThermostatTRE33705 180° F (2)2) Thermostat CoverTT236203) Thermostat Cover GskTT20215 -
1) Fuel Transfer PumpTRE422112) Fuel Pump GasketTR27285 -
Water Pump Repair KitWithout ImpellerTRE19507 (6)With ImpellerTRE62658 (6)2) Water Pump GasketTT20242 TT20268 -
1) Injector, PencilTAR895642) Kit, GrommetTMX5043) CapTAT27622 TAR856184) WasherTT295395) Tube NutTR51937 -
Seal, InjectorTR60746 TR48000
(1): Do not use with Flywheel Housing (m) T20300, T22991.
(2): Do not use with Housing (m) R54096, R70741, R74549.
(3): Conversion Kit TMX386: Available Consists of: TT31306 X1 Nipple TR99802 X2 Hose.
(4): Use TR74194 with C.Rod (m) T20007; use TR80033 with C.Rod (m) R81410.
(5): Camshaft has a 40 mm wide front bearing journal and made for a rear press in tachometer drive, it will replace early camshafts with narrower front bearing journal without any issue. Replaces camshafts marked T20015, T20016, R79643, R106957 and RE522311.
(6): See the Water Pump Identification Chart to make sure these part numbers are correct. You will need the water pump casting number and will need to know if you have a stamped steel pulley or a cast iron pulley.